“5 in 1” Tubing Connectors Tubing & Connectors Chemistry Materials Testing These connectors fit 5 tubing sizes, either connecting the same size tubing on both ends or acting as a reducer between any two of the 5 sizes.
“T” Shaped Tubing Connectors Tubing & Connectors Chemistry Materials Testing Use these T-shaped fittings to ensure a tight, secure connection between lengths of tubing with the same inner diameter.
2-Piece Stopcocks Tubing & Connectors Chemistry Materials Testing These molded polyethylene stopcocks snap together for a tight seal.
28-Piece Fitting Kit Tubing & Connectors Chemistry Materials Testing Compatible with tubing from 3.2 to 12.7 mm (0.13 to 0.5"), these fittings are for the most common lab connections.
Check Valves – LDPE Tubing & Connectors Chemistry Materials Testing Ensure one-way flow in vacuum lines with these polyethylene check valves.
Check Valves – PP Tubing & Connectors Chemistry Materials Testing These polypropylene valves have a neoprene disk that stops reverse flow of liquid when pressure is interrupted.
Complete 72-Piece Fitting Assortment Tubing & Connectors Chemistry Materials Testing This assortment of 72 plastic fittings has everything you need for routine laboratory setups.
Fluo-Kem Lab-Thread Tape Tubing & Connectors Chemical Analysis Lab Maintenance Manufacturing & Quality Control This pure, non-sintered Teflon® PTFE tape has no adhesive yet seals small apertures exceptionally well.
Gas Dispersion Tube Tubing & Connectors Chemical Analysis Chemistry Manufacturing & Quality Control These gas dispersion tubes have a sealed-in, coarse-porosity polyethylene disc in a high-density polyethylene bell that produces smaller bubbles.
Heavy Duty Faucets Tubing & Connectors Chemistry Materials Testing This polyethylene faucet has a needle-type Teflon® O-ring seal that keeps back-pressure liquid from escaping through the operating knob.
Jaw Style Tubing Clamp Tubing & Connectors Materials Testing This durable plastic clamp attaches anywhere on tubing without disconnecting it.
Metal Quick Disconnect Couplings Tubing & Connectors Chemistry Materials Testing These chrome-plated brass connectors with Buna-N O-ring, made by Colder Products, have easy-to-use slide locks for leak-free, in-line connections and shut off automatically when disconnected.
Mix & Match Quick Disconnects Tubing & Connectors Chemistry Materials Testing These quick disconnects fit tubing from 3 to 12 mm (0.13 to 0.5") I.D. and combine into reducing connections.
Pinch Valve Tubing & Connectors Chemistry Materials Testing This pinch valve controls fluid flow without drips.
Plastic Tubing Clamps Tubing & Connectors Materials Testing These durable plastic tubing clamps will not rust or corrode.
Plastic Tubing Cutter Tubing & Connectors Chemistry Materials Testing This portable, pocket-size cutter cuts flexible tubing.
Quick Disconnects Tubing & Connectors Chemistry Materials Testing Connect same-size tubing with these polyethylene quick disconnects.
Screw Style Tubing Clamp Tubing & Connectors Materials Testing This clamp offers on/off and fine flow control accurate enough to replace stopcocks in many applications.
